JVC AV-32R370KE - Manual (Page 37)

Additional menu operations
37
$95.(  /&7$8  (1*/,6+
„ Using the TV speakers as the
centre speakers for the PRO
LOGIC 3D-PHONIC function
When the PRO LOGIC 3D-PHONIC
function is operating, the front speakers and
TV speakers are all used. The TV speakers
take the role of a centre speaker. It makes
spoken dialogues more vivid and easier to
listen to.
Preparation:
• If you have had headphones connected to
your TV set, disconnect them.
1 Press the a button to display the
MENU (main menu)
2 Press the 6 buttons to choose
DIGITAL SURROUND. Then press
the a button to display the
DIGITAL SURROUND menu
3 Press the 6 buttons to choose
PRO LOGIC 3D-PHONIC. Then
press the 3 button to display the
sub-menu of PRO LOGIC 3D-
PHONIC function
4 Press the 6 buttons to choose
TV SPEAKER. Then press the 5
buttons to choose CENTRE
L/C/R:
L/C/R is used to make all the sound come
from the TV speakers.
OFF:
OFF is used to cut sound from the TV
speakers.
When the sound quality of the audio
system is better than the TV’s speakers,
you can set the TV SPEAKER to OFF to
cut the sound of the TV speakers.
5 Press the a button to complete
the settings
The menu disappears.
• Use the amplifier volume to control
and set the volume of the front
speakers to fit in with the TV speakers.
„ Setting the DOLBY PRO LOGIC
function
Set the items in the sub-menu of the DOLBY
PRO LOGIC function properly, and use the
test signal to control the volume of the
speakers so that you can listen to the sounds
from them evenly. Be sure to do this
operation before using the DOLBY PRO
LOGIC function.
Preparation:
• If you have had the headphones connected
to your TV set, disconnect them.
• Increase the volume of the TV speakers to
a level at which you ordinarily listen. If
you do not do this before starting the
operation, it is impossible to control the
volume from within the function.
When you are using an audio system,
however, set the amplifier volume to zero
to cut the front speakers. Then pre-set the
TV sound volume level to about 10.
1 Press the a button to display the
MENU (main menu)
2 Press the 6 buttons to choose
DIGITAL SURROUND. Then press
the a button to display the
DIGITAL SURROUND menu
3 Press the 6 buttons to choose
DOLBY PRO LOGIC. Then press
the 3 button to display the sub-
menu of the DOLBY PRO LOGIC
function
AV-32&28R370KE.fm Page 37 Thursday, February 6, 2003 10:38 AM