JVC AV-32R370KE - Manual (Page 6)

6
Setting up your TV
$95.(  /&7$8  (1*/,6+
Putting the batteries into the
Remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on how much you use the
remote control.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as you need to.
• If the remote control does not work
properly, replace the batteries.
Initial settings
When the TV is first turned on, it goes into
the initial setting mode, and you will see the
JVC logo. Follow the instructions on the
screen display to make the initial settings.
1 Press the Main power button on the
TV
The Power lamp lights red (for power on),
then green (for TV on) and the JVC logo
appears.
• If the power lamp stays red and does not
change to green:
your TV is in the standby mode. Press the
# (standby) button on the remote
control to turn your TV on.
• If the JVC logo does not appear this is
because your TV has already been turned
on for the first time:
use the “LANGUAGE” and “AUTO
PROGRAM” functions to make the initial
settings. For details, see “INSTALL” on
page 29.
P
TV OK
MENU
P
3D
Blue button
Main power
button
Power lamp
AV-32&28R370KE.fm Page 6 Thursday, February 6, 2003 10:38 AM