JVC AV-32R370KE - Manual (Page 76)

Using the TV’s menu
31
(1*/,6+
$9763(  /&7$8  (QJOLVK
4 Press the Number buttons to enter
the remaining CH/CC number
The TV shifts to registration mode.
When the registration is completed, the
picture of the TV channel appears on the
screen.
• The CH/CC number is a number
indicating the broadcast frequency to
the TV. If the TV cannot detect the TV
channel corresponding to the broadcast
frequency indicated by the CH/CC
number, a picture in the no-signal state
appears.
DELETE
1 Press the 6 6 6 6 buttons to choose a
TV channel
Every time you press the 6 buttons, the
Programme number (PR) is changed over,
and the picture of the TV channel
registered in the Programme number (PR)
appears on the screen.
2 Press the yellow button to delete
the TV channel
The TV channel is deleted from the
Programme numbers (PR) list.
MANUAL
Preparation:
• As long as you register the TV channel
(SECAM-L system) from a French
station, be sure to set the COUNTRY
setting to FRANCE. If the COUNTRY
setting is not FRANCE, follow the
description “Changing the COUNTRY
setting” on page 33 to change the
COUNTRY setting to FRANCE, then
start the MANUAL function.
1 Press the 6 6 6 6 buttons to choose a
Programme number (PR) to which
you want to register a new TV
channel
2 Press the blue button to activate
the MANUAL function
At the right side following the CH/CC
number, the SYSTEM (broadcasting
system) of the TV channel appears.
To cancel the MANUAL function:
Press the h (Information) button.
3 Press the 3 3 3 3 button to choose the
SYSTEM (broadcasting system) for
a TV channel you want to register
TV channel (SECAM-L system)
from a French station:
Set the SYSTEM to “L”. If it is set to one
other than “L”, you cannot receive the TV
channel of the SECAM-L system.
Other TV channels:
If you do not know the correct
broadcasting system, set the SYSTEM to
“B/G”. If “B/G” is not correct, it results in
the fact that you will not hear the sound
normally when the TV detects a TV
channel. In this case, retry to set the
SYSTEM again correctly so that no
problem arises.
4 Press the green or red button to
search for a TV channel
Scanning stops when the TV finds a TV
channel. Then the TV channel is
displayed.
AV-32&28T35SPE_Eng.fm Page 31 Thursday, February 6, 2003 2:29 PM