JVC AV-32R370KE - Manual (Page 67)

22
Using the TV’s menu
$9763(  /&7$8  (QJOLVK
EXT SETTING
„ y y y y (S-VIDEO input)
When connecting a device (such as S-VHS
VCR) which enables an S-VIDEO signal (Y/
C signal) to be output, you can enjoy high-
quality picture of the S-VIDEO signal (Y/C
signal).
Preparation:
• At first, read the Device Instruction
Manual and “Additional preparation” on
page 35 to connect the device to the TV
properly. Second, follow the Device
Instruction Manual to set the device so
that an S-VIDEO signal (Y/C signal) can
be output to the TV.
• Do not set y (S-VIDEO input) to the
EXT terminal connected to a device
which cannot output an S-VIDEO (Y/C
signal). If it is set wrongly, a picture
cannot appear.
1 Choose an EXT terminal
2 Press the yellow button and set the
y y y y (S-VIDEO input).
Then press the a a a a button
An y (S-VIDEO input) mark is
displayed. You can view an S-VIDEO
signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the y y y y (S-VIDEO input)
setting:
Press the yellow button and turn off y
(S-VIDEO input) mark. The regular video
signal (composite signal) pictures are
resumed.
• The EXT-1 terminal does not support
S-VIDEO signal (Y/C signal) and you
cannot set y (S-VIDEO input) in
the EXT-1 terminal.
• Setting y (S-VIDEO input) changes
the head character from “E” to “S”.
For example, “E2” is changed to “S2”.
• Even an device which enables the S-
VIDEO signal (Y/C signal) to be
output may output a regular video
signal (composite signal) depending
on the device setting. If a picture
cannot appear because y (S-VIDEO
input) setting has been made, read the
device Instruction Manual carefully
again to check for the device settings.
AV-32&28T35SPE_Eng.fm Page 22 Thursday, February 6, 2003 2:29 PM