Jeep 75598 - Manual (Page 22)

™
Label Decoration
22
G
®
Proper label application will help to keep the labels
looking their best! When applying labels, keep the
following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle
with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations. For
best results, avoid repositioning a label once it has been
applied to the vehicle.
• After applying a label, rub the label firmly with a
clean, dry cloth to make sure the label is adhered
to your vehicle. Start at the center of a label, and
smooth towards the outer edges to remove
air bubbles.
One-time assembly is now complete.
IMPORTANT!
• Please carefully read the owner’s information in this
manual and teach your child about proper vehicle opera-
tion and rules for safe driving before allowing operation
of this vehicle.
• For safety reasons, your vehicle has been pre-set so that
it will only operate at low speed (2 1 /
2
mph, maximum).
Make sure that your child can safely operate this vehicle
at low speed before adjusting the vehicle to run at high
speed (5 mph, maximum). To disconnect high speed
lock-out,please see page 27.
Left Side View
Right Side View
Back View
4
14
18
19
19
15
16
17 18
2
8
11
18
19
1
11
9
3
10 5
18
19
10
7
6
Right Side View
29
30
• Your Limited Edition Jeep Wrangler includes additional
gold labels. These labels (29 and 30) should be applied
over labels 1, 2 and 3 (on both sides of the vehicle).