Network settings, Ip address settings, Setting the ip address for vn-v686wpu – JVC OUTDOOR PTZ IP DOME CAMERA VN-V686WPU User Manual

Page 26

Advertising
background image

26

Network Settings

Setting the IP address for VN-V686WPU

There are two methods to set the IP address for
VN-V686WPU as follows.

(A) Assigning an IP address to VN-V686WPU

from the DHCP server

(B) Assigning a static IP address to VN-

V686WPU

(A) Assigning an IP address from the

DHCP server

● VN-V686WPU is set to ADHCP EnableB (the

DHCP client function is ON) by default. To
assign an IP address from the DHCP server,
connect the DHCP server to the LAN, set the
[IP setting] of VN-V686WPU to

ADHCPB, and

click the [OK] button. (A Page 30)

● For details on IP addresses assigned to VN-

V686WPU, consult your network administrator.
You can look up the IP address of VN-
V686WPU using the search tool in the
supplied CD-ROM.
For details, please refer to

AReadmeB file in

the CD-ROM.

Note

● Set the DHCP server such that the same IP

address is always assigned to the MAC address
of VN-V686WPU by the DHCP server.
Connection may fail if the above setting is not
performed.

(B) Assigning a static IP address

System configuration required for setting

IP address

VN-V686WPU at factory default is set to

ADHCP

Enable

B (DHCP client function is On). When it is

connected to a LAN without DHCP servers, it will
activate under the following IP address after
timeout.

IP address

: 192.168.0.2

Subnet mask

: 255.255.255.0

Default gateway

: None

Memo

:

● To set a static IP address for VN-V686WPU,

connect VN-V686WPU, the switching hub and
the computer for setting using a straight LAN
cable of Category 5 and above.

Set up the computer for setting the IP

address.

Minimum computer specifications for

setting
OS

: Windows XP (Professional or

Home Edition) (SP2)

Web browser

: Internet Explorer Version 6.0

Note

● When setting the IP address for VN-V686WPU,

do so by using a network that is made up only of
VN-V686WPU, the computer for setting and the
switching hub.

● Using a hub connected to other network

devices or networks via a LAN cable for setting
can cause problems.

IP Address Settings

VN-V686WPU_EN.book Page 26 Tuesday, December 25, 2007 11:23 AM

Advertising