Jensen Tools 100 Sereis - Manual (Page 21)

BudgeTone-100 User Manual
Grandstream Networks, Inc.
- 21 -
Menu Item Menu Functions
9
Display “[9] codE rEL”
Press Menu to display the code releases
Press ‘↓’ or ’↑’ to browse
line 1 “b 2006-03-06” – date: boot code
2 “ 1. 0. 8. 11” – version: boot code
3 “P 2006-09-14” – date: phone code
4 “ 1. 0. 8. 32 – version: phone code
5 “c 2005-03-05” – date: codec
6 “ 1. 0. 1. 0” – version: codec
7 “h 2006-09-14” – date: web server
8 “ 1. 0. 8. 32” – version: web server
9 “1r 2004-05-12” – date: 1
st ring tone
10 “ 1. 0. 0. 0” – version: ring tone
11 “2r 2005-07-21” – date: 2
nd ring tone
12 “ 1. 0. 0. 0” – version: ring tone
13 “3r 0000-00-00” – date: 3
rd ring tone
14 “ 0. 0. 0. 0” – version: ring tone
(all zeroes means unavailable or unsupported)
Press MENU to exit
10
Display “[10] Phy Addr”
Press MENU to display the physical / MAC address
Press ‘↓’ or ’↑’ to exit
11
Display “[11] ring 0”
Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the
stored ring tones. Now only 3 are available, ring 0 (default), ring 1 and ring
2. ring 3 is unavailable or unsupported.
Press MENU to select and exit
Display “ -- rESEt --”, please be very CAREFUL here. Only shown when
’↑’ key to pressed:
• Key in the physical / MAC address on back of the phone, Press MENU,
phone will be reset to FACTORY DEFAULT setting, and all your
setting will be erased.
• Press MENU key without key in anything, phone will function the
same as power cycle or reboot. This is called soft reboot.