Jensen Tools 100 Sereis - Manual (Page 25)

BudgeTone-100 User Manual
Grandstream Networks, Inc.
- 25 -
MAC Address The device ID, in HEX format. This is very important ID for ISP
troubleshooting.
IP Address This field shows IP address of BudgeTone 100.
Product Model This field contains the product model info. Like BT100 (4M, discontinued
legacy product) or BT100 REV2.0 (8M RAM)
Software Version Program: This is the main firmware release usually requested by support.
Bootloader: This indicates bootloader version.
HTML: This indicates the web interface version, normally not changed
unless there is new parameter introduced in.
VOC: This indicates the coder program version, normally not changed.
System Uptime This shows system up time since last reboot.
Registered This shows whether the unit is registered to VoIP service provider’s server
or proxy.
PPPoE Link Up This shows whether the PPPoE is up if connected to DSL modem
NAT This shows what kind of NAT the BudgeTone is behind if it is not in open
interne, determined by STUN, usually is Full Cone, Port Restricted Cone
etc., non-symmetric NAT if using general SOHO router. If symmetric NAT
detected, STUN can NOT be used and Outbound Proxy (or Session Border
Controller) is required to resolve the NAT issue.
NAT Mapped IP WAN side public IP of the NAT router if phone connected to LAN port of
the router
Other Statistical
Status of Phone Self-explainable, see the page displayed.