Jensen Tools 100 Sereis - Manual (Page 24)

BudgeTone-100 User Manual
Grandstream Networks, Inc.
- 24 -
The password is case sensitive with maximum length of 25 characters. The factory default password
for End User is “123”, for Administrator is “admin” respectively. Only administrator has the privilege
to get access to “ADVANCED SETTINGS” configuration page.
NOTE:
• If you cannot log into the configuration pages by using default password, please check with the
VoIP service provider. Most likely, the service provider has already provisioned and
automatically configured the device for you and has changed the default password.
6.2.2 Configuration Menu
After input the correct password into the login screen, the embedded Web server of the IP phone will
respond with the Configuration Pages screen, which is explained in details below.
• Status Page:
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
MAC Address: 00.0B.82.05.CA.91
IP Address: 192.168.1.101
Product Model: BT100 REV 2.0
Software Version: Program-- 1.0.8.32 Bootloader-- 1.0.8.11 HTML-- 1.0.8.32 VOC-- 1.0.1.0
System Up Time: 0 day(s) 18 hour(s) 1 minute(s)
Registered: Yes
PPPoE Link Up: disabled
NAT: detected NAT type is full cone
NAT Mapped IP: 70.22.120.137
NAT Mapped Port: 60617
Total Inbound Calls: 7
Total Outbound Calls: 2
Total Missed Calls: 3
Total Call Time (in minutes): 19
Total SIP Message Sent: 428
Total SIP Message Received: 626
Total RTP Packet Sent: 38542
Total RTP Packet Received: 38514
Total RTP Packet Loss: 0
All Rights Reserved Grandstream Networks, Inc. 2005