Jensen Tools 100 Sereis - Manual (Page 27)

BudgeTone-100 User Manual
Grandstream Networks, Inc.
- 27 -
End user Password This contains the password for end user to access the Web Configuration Menu.
This field is case sensitive and maximum length is 25 characters. The default
end user password is “123”.
End user only has privilege to see the Status page and change parameters in
Basic page. End user can NOT access to Advanced Settings pages and will get
error message if try to.
IP Address There are 2 modes under which the IP phone can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode are
not used (even though they are still saved in the Flash memory) and the IP
phone will acquire its IP address from the first DHCP server it discovers on the
LAN it attaches to.
. PPPoE account settings are configured here if the user is connecting the IP
phone directly to the DSL/ADSL modem. Users can specify DNS server
manually by entering DNS server’s IP address. The IP Phone will attempt to
establish a PPPoE session if PPPoE account is set. For most users, just leave
them blank
- If Static IP mode is selected, the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (mandatory), DNS Server 2 (optional) fields need to be
configured. These fields are set to zero by default.
Time zone Displayed date/time will be adjusted according to the specified time zone.
Day light savings
time Default NO. If set to Yes, then the displayed time will be 1 hour ahead of
normal time.
Date display format This parameter controls the date display format.