JAI AT-140GE - Manual (Page 14)

AT-140GE
- 12 -
5.4.2 SW-100
This switch can select the type of the signal which is output through 12-pin #10. The factory
default is TTL (XEEN) and it can be changed to Open collector (EEN).
No Functions
Setting
ON OFF
1 EEN output select Open collector (EEN) TTL（XEEN）
2 NC - -
Fig.7. SW100 (
Right board looking from the front)
5.4.3 SW-700
This DIP switch can select OPT IN or Iris video output through pin#3 and #4 of the
HIROSE 12 pin connector.
No Functions
Setting
ON OFF
1
OPT IN(+) / Iris video OUT
select
Iris video OPT IN (+)
2
OPT IN(-) / Iris video OUT
select
GND for iris video OPT IN (-)
Fig.8 SW700 (On the top board)
ON
ON