JAI AT-140GE - Manual (Page 21)

AT-140GE
- 19 -
7.4. Configuring the GPIO module (register settings)
7.4.1 Input /Output Signal Selector
GPIO is used to determine which signal is assigned which terminal. For the details, please
refer to Register Map, Digital I/O, Acquisition and Trigger Control and Pulse Generator.
Line Selector
Line Source
Line Polarity
7.4.2 12-bit counter
Address Internal Name GenIcam Name Access Size Value (Range)
0xB004 Counter Dividing Value
ClockPreScaler
R/W 4
0x000: Bypass
0x001: 1/2 Dividing
0x002: 1/3 Dividing
|
0xFFF: 1/4096 Dividing