JAI AT-140GE - Manual (Page 9)

AT-140GE
- 7 -
3. Main Features
 3 x 1/2" CCD progressive scan RGB color camera for vision applications
 3 x 1392(h) x 1040 (v) 4.65  m effective square pixels
 Compact RGB prism for C-mount lenses
 Shading reduction permits wider choice of lenses
 20.77 frames per second with 1392 (h) x 1040 (v) pixels
 59.45 fps with 1392 (h) x 131 (v) pixels in 1/8 partial scan mode
 Variable partial scan is available for faster frame rate
 Vertical binning for higher sensitivity and frame rate of 32.92 fps
 24-bit RGB output or 32-bit RGB output (RGB 8, RGB 10V1 or RGB 10V2 pixel format)
 Gamma is selectable for 0.45, 0.6 or LUT (Look Up Table)
 Linear matrix circuit with sRGB or Adobe RGB pre-setting
 Knee function available for knee point and knee slope settings.
 Shading compensation circuit built in
 Blemish compensation ON/OFF
 Noise reduction circuit (ON/OFF, level settings)
 Smearless mode available in EPS and PWC
 Edge Pre-select, Pulse Width Control and Reset Continuous Trigger modes
 Sequence trigger mode for on-the –fly change of gain, exposure and ROI
 Delayed readout mode for smooth transmission of multi-camera applications
 Common or individual programmable exposure for RGB
 Auto exposure capability
 AGC (Automatic Gain Control) from -3dB to 12dB
 Manual, continuous, one push or pre-set white balance
 Analog iris video output for lens iris control
 LVAL synchronous/asynchronous operation (auto-detect)
 Comprehensive software tools and SDK for Windows XP/Vista (32 bit “x86” and 64
bit “x64” JAI SDK Ver. 1.2.1 and after )