JAI AT-140GE - Manual (Page 57)

AT-140GE
- 55 -
Register Map
The table below provides detailed information for the hardware registers used for controlling
the camera and obtaining information on the status of the camera. The content of this
register map is also found in the XML file, as stipulated by the GenICam standard.
Image Format Control
Address
Display Name
(JAI Control Tool)
GenICam name
Read /
Write
Size Value / Range of value Description
Default
value
0xA400 Width Max WidthMax R 4 1024 Width max 1024
0xA404 Height Max HeightMax R 4 768 Height max 768
0xA410 Pixel Format PixelFormat RW 4
0x02180014
0x0220001C
0x0220001D
RGB8Packed
RGB10V1Packed
RGBV10V2Packed
RGB 8
0xA500 ROI Mode ROIMode
RW
4 1 to 5
1:ROI disable
2 to 5: Enable
1
0xA504 ROI 1 Width Width
RW
4 8 - 1392 Width W.Max
0xA508 ROI 1 Height Height
RW
4 8 – 1040 Height H.Max
0xA50C ROI 1 Offset X OffsetX
RW
4 0 – 1384 Horizontal offset 0
0xA510 ROI 1 Offset Y OffsetY
RW
4 0 – 1032 Vertical offset 0
0xA514 ROI 2 Width Width2
RW
4 8 - 1392 Width 2 W.Max
0xA518 ROI 2 Height Height2
RW
4 8 – 1040 Height 2 H.Max
0xA51C ROI 2 Offset X OffsetX2
RW
4 0 – 1384 Offset X2 0
0xA520 ROI 2 Offset Y OffsetY2
RW
4 0 – 1032 Offset Y2 0
0xA524 ROI 3 Width Width3
RW
4 8 - 1392 Width 3 W.Max
0xA528 ROI 3 Height Height3
RW
4 8 – 1040 Height 3 H.Max
0xA52C ROI 3 Offset X OffsetX3
RW
4 0 – 1384 Offset X3 0
Device Information
Address
Display Name
(JAI Control Tool)
GenICam name
Read /
Write
Size Value / Range of value Description
Default
value
0x0048 Device Vendor Name DeviceVendoeName R 32 Manufacture of this device
0x0068 Device Model Name DeviceModelName R 32 Model Name of this device
0x0088 Device Version DeviceVersion R 32 Version of this device
0x00A8
Device Manufacturer
Info
DeviceManufacturerInfo R 48
Provides extended
manufacturer information
about the device.
0x00D8 Device ID DeviceID R 16 Camera serial number
0x00E8 Device User ID DeviceUserID RW 16
User assignable string (16
Byte)
0xA714 FPGA version DeviceFPGAVersion R 4
0xA640 Device Reset DeviceReset W 4 Command=1
0xA1FC Temperature Temperature R 4 0.0625° step -55 ℃ ～ 150 ℃