JVC DynaPix LT-32DX7SSP - Manual (Page 17)

29 30
ENGLISH
· Subtitle / Audio selection / Sleep timer / Zoom / Multi-picture, etc.
Audio Selection
Spanish
English
Features
>
Sleep Timer
Child Lock
Appearance
Blue Back
Favourite Setting
Type A
On
Illumination Bright Power Lamp On
Features
> Sleep Timer
Off
Auto
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
Zoom
Regular
16 : 9 Zoom
High 3D Cinema Sound
Subtitle Selection
Off
On
Subtitle Selection
Off
On
Spanish
English
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Useful functions
Select audio
language
AUDIO
SELECTION
Set a time for
the TV to turn
itself off
SLEEP TIMER
Change the
aspect ratio
ZOOM
 Switch to another language
 By default, the language set in “Subtitle Language”
(P. 41) is automatically selected.
When not broadcast in that language, another
broadcast language is automatically selected.
 When no subtitles are broadcasted, “No Subtitles” is
displayed.
2 set
1 select
Enjoy
ambient
sound
3D CINEMA
SOUND
High : For stereo sound
Low : For stereo sound
(when the sound distorts in “High” mode)
Mono : For mono sound
(emulates a stereo-like sound)
Off : Turns off “3D Cinema Sound”
1
2
3
4
1 select
“Features”
2 next
1 select
“Sleep Timer”
2 next
1 select a time in
minutes
2 set
 Cancel  Set the time to “0” in step 4
 Remaining time  You can confirm the remaining time at step 4,
after repeating this process.
Move the picture with
1 or 4 while this bar is
displayed
1 select
2 set
 When set to “Auto”, the aspect ratio will turn to the ratio obtained from the
information the TV received.
Without receiving aspect information, it will be the setting in “4:3 Auto Aspect”
(P. 39)
 Not available in 1080i (1125i) / 720p (750p) signals.
 In PC mode, “Regular” and “Full” can be selected.
View
subtitles
SUBTITLE
(Digital channels)
2 set
1 select
Off
On : Don’t display
: Display
1 select “ON”
2 next
2 set
1 select
: Special subtitles for the hearing impaired
Undefined : When the subtitle’s language cannot be
identified
 The language that can be selected depends on the
broadcast.
By default, the language set in “Audio Language” (P. 41)
is automatically selected.
When not broadcast in that language, another broadcast
language is automatically selected.
 Switch to another language
: Special audio track for the visually impaired
Undefined : When the audio’s language cannot be
identified
Dolby : Dolby Digital
 The language that can be selected depends on the
broadcast.
 Please read ““Dolby Digital” output from the
“DIGITAL AUDIO OUT” terminal” (P. 57) before
selecting “Dolby”
(Digital channels)
29-30 6/29/2006 1:15:00 PM