JVC DynaPix LT-32DX7SSP - Manual (Page 28)

51 52
ENGLISH
When you
have trouble
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Severe noise or
snow
Troubleshooting
Patterns, stripes
or noise
I can’t turn it on!
 Is the power cord connected to the AC outlet
correctly?
The remote
control doesn’t
work!
 Is the TV connected correctly to
the aerial?
 Change the direction of the aerial.
 Is the aerial or its cable
damaged?
 Consult your retailer
Ghosting
(Doubling of images)
 Are you receiving interference
from signals reflected off
mountains or buildings?
 Adjust the direction of your
aerial, or change to a
good-quality directional aerial
 Is the aerial receiving interference
from high-voltage power lines or
wireless transmitters?
 Consult your retailer
 Are connected devices too close
to the TV?
 Insert the minimum distance
between the aerial and the
cause of interference until no
interference
 Are the batteries flat?
 Are you more than 7 meters away
from the TV?
 Is the “MODE (TV, VDR/DVR, DVD, HC)” set to “TV”?
 When viewing teletext, the TV menu bar does not appear.
 Depending on the stability of the signal, there may be a time
lag when changing channels.
Problem Actions page
 Is the analogue channel reception poor, too?
 Following the instructions in “Severe noise or snow”
can solve this problem.
 Digital channels are not displayed
 When the TV cannot find the digital channels
 There may be problems at the aerial, radio waves,
or the area you live in, where reception is bad.
Consult your retailer.
Not displayed
(black screen)
51
14
–
 Unplug TV, several minutes later plug it in again.
Remote control
stops working
–
 Unnatural colour >>> Adjust “Colour” and “Bright-1”.
Check your “Colour System”
 Noise >>> Set to the following functions.
Picture Mode : Standard
Super DigiPure : Max
 Dull picture >>> Set to the following functions.
Picture Mode : Bright
Super DigiPure : Min
Poor picture quality
36
39
36
39
36
39
 Audio signals received from EXT-5 and EXT-6 can not be
sent to the “AUDIO OUT” terminal.
No sound from the
audio component
–
 If you connected S-Video output device, check the “S-IN”
setting.
 If the top of the image is distorted, check the video signal
quality itself.
 If movement appears unnatural when receiving a signal
from a DVD player, etc. with 625p (progressive-scanning),
change the output setting of the external device to 625i
(interlace-scanning).
Strange picture
when using an external
device
26
–
–
Basics
Screen
Picture
Sound
 Hold down “ ” and “ ” on the TV
simultaneously for three or more seconds to restart.
Digital channel screen
is frozen
–
 It is not a malfunction. Some functions (dark background)
in the menu do not work depending on the situation.
Some functions
do not work
–
 Press “ ” to return to your settings.
Aspect ratio changes
unintentionally
30
 Adjust the “PC Position”.
PC screen alignment
is off
25
 Adjust the “Bass” and “Treble”.
 If receiving a poor signal in “Stereo / t·u”, switch to “Mono”.
Poor sound
36
36
 Analogue channels
 Digital channels.  (P. 14)
51-52 6/29/2006 1:16:42 PM