JVC DynaPix LT-32DX7SSP - Manual (Page 21)

37 38
ENGLISH
DTV
DTV Menu
Timer
Edit PR
Configuration
Setup
Installation
Setup 14:00 05/05/2006
Digital Audio Output PCM
Banner Duration 2 sec
Receiver Upgrade Auto
Common Interface No CI Module
Antenna Power Off
Off Antenna Power
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
 To the previous
screen

 Exit

1
2
3
4
5
6
7
select
Display the menu bar
Select “DTV”
Select an item
Switch to digital channels
Finish
Change setting
1 select
2 next
1 select
2 next
Using DTV menu
Menu Item Adjustments / Configurations
DTV
Timer Reserve a programme to record / watch (P. 27)
Edit PR Edit / Delete / Lock registered digital channels or add them to favourites.
(P. 47)
Configuration
Country Confirm the country of installation (P. 41)
Menu Language Select a language for on-screen menus (P. 41)
Audio Language Select a default language for audio (P. 41)
Subtitle Language Select a default language for subtile (P. 41)
Teletext Language Select a default language for teletext (P. 41)
Enter PIN Code Change PIN code (P. 41)
Favourite Mode Enable your favourite channels (P. 41)
Maturity Rating Restrict programmes according to the age (P. 41)
Setup
Digital Audio Output
When the Dolby Digital signal is received, you can select to output the
signal from the DIGITAL AUDIO OUTPUT terminal. (P. 43)
Banner Duration Select the display time for channel information (2 sec / 5 sec / 8 sec)
Receiver Upgrade Upgrade your tuner software as newer versions becomes available. (P. 43)
Common Interface Set Conditional Access Module (P. 43)
Antenna Power Power supply for the indoor aerial (P. 43)
Installation
Service Scan Register channels (P. 45)
Signal Check Check the broadcast signal (P. 45)
Factory Settings Initialise the DTV settings (P. 45)
Select “Setup”
select
 DTV menu cannot
be operated with
the side buttons.
Digital channels original function and setting can be selected from the DTV menu.
E.g. “Antenna Power”
E.g. “Antenna Power”
When watching digital channels or changing DTV menu settings, it may be necessary for you to
enter a PIN code.
Once a PIN code has been entered, there is no need to enter it again until the TV is turned off.
 The default PIN code is “0000”.
 You can set your own PIN code.  “Enter PIN Code” (P. 41)
When entering the PIN code
37-38 6/29/2006 1:15:18 PM