JVC DynaPix LT-32DX7SSP - Manual (Page 6)

7 8
ENGLISH
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Basic connections
200mm
50mm 150mm 150mm 50mm
 Power requirements
 Connect the power cord only to a 220-240V,
50/60Hz AC outlet.
 When attaching the TV to the wall, use the
optional JVC wall mounting unit
 Consult a qualified technician.
 See the included manual on mounting procedures.
 JVC assumes no responsibility for damage due to
improper mounting.
 200mm × 200mm mount which conforms to VESA
standards.
 Installation requirements
 To avoid overheating, ensure the unit has ample
room.
Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.

Connect with other devices  “Connecting external devices” (P. 9)
Care when setting Watch pay-TV digital channels
Subscribe to a broadcasting company beforehand. A Smart
Card (B) will be sent by the broadcasting company after
subscribing to it. It may be necessary for you to purchase a
Conditional Access Module (A) in addition to the Smart Card.
Consult your broadcasting company or retailer.
1
Unplug the power cord
2 Insert “B” into “A”.
3 Insert “A”.
4 Plug the power cord, and turn the power on.
5 Perform necessary settings  “Common Interface” (P. 43)
 Pay-TV analogue channels cannot be watched.
Connect the aerial
 After all the connections have been made, insert the plug into an AC outlet.
 When using an aerial which needs external power  “Power supply for the indoor aerial” (P. 56)
AERIAL
VCR / DVD recorder
 After all the connections have been made, insert the plug into an AC outlet.
 Connect “T-V LINK” compatible recording device to “EXT-2”.
 “T-V LINK”  “What is “T-V LINK”?” (P. 11)
 When using an indoor aerial which needs external power, connect the aerial directly to the TV.
 “Power supply for the indoor aerial” (P. 56)
EXT-2
Connect a VCR / DVD recorder
AERIAL
EXT-1
A
B
7-8 6/29/2006 1:12:51 PM