JVC DynaPix LT-32DX7SSP - Manual (Page 8)

11 12
ENGLISH
Català
English
Castellano
First Time Installation > Language Setting
Step 1: Please choose language
Language
First Time Installation > Country Setting
Step 2: Please choose country
Country Spain
First Time Installation > Service Scan
Step 3: Please press OK
Scan Automatic
Start Channel _ _
Stop Channel _ _
Mode Add
Start Scan
Service
First Time Installation > Service Scan
Step 3: Please press OK
Scan Automatic
Start Channel _ _
Stop Channel _ _
Mode Add
Start Scan
Service
TVE 1
UHF33 : 3 Services found
24H TVE TVE 2
Stop Channel _ _
Mode Add
Start Scan
Teema
Teema
Teema
Yes No
Scan completed! Store services?
No services found!
OK
Start Channel _ _
Stop Channel _ _
Mode Add
Start Scan On Off
Antenna Power
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Initial settings
Register digital / analogue channels on TV. These channels can be edited later.
(In this manual, digital terrestrial broadcasting is indicated as digital channels,
analogue terrestrial broadcasting and analogue cable TV as analogue channels.)
Begin
 To the previous screen 
 Exit 
BACK
TV/DTV
 If the “JVC” logo does not appear or if you
wish to make changes later
 Digital channel settings : “Configurations” (P. 41)
“Installation” (P. 45)
Analogue channel settings : “Set Up” (P. 36)
 The remote control
doesn’t work
 Confirm the mode is set to
“TV”.
 Shown only when powering on for the first time.
 The power button on the unit can also be used.
2
1
Set digital channels
Select a language
1 select
2 set
Confirm “Spain” is set
Scan digital channels
Register digital channels
1
2
4
5
What is “T-V LINK”?
Connecting the TV to a “T-V LINK”
compatible device allows :
 Analogue channels to be instantly
registered on the device.
 The “DIRECT REC” function to be
used.
 “Technical information” (P. 56)
 “T-V LINK” variations
“T-V LINK” (JVC) “Q-LINK” (Panasonic)
“Megalogic” (Grundig) “Data Logic” (Metz)
“SMARTLINK” (Sony) “Easy Link” (Philips)
 This TV can only receive
Spanish digital channels.
 If digital channels are not found, the following message will appear.
 After completing following steps, read “When the TV cannot find the digital
channels” (P. 14) and try scanning digital channels again

 Language for on-screen
displays when watching digital
channel including the DTV
menu.
! (Next page)
3
Set the aerial power supply
 Only when using an aerial which
needs external power, select “On”.
 “Power supply for the indoor
aerial” (P. 56)
11-12 6/29/2006 1:12:56 PM