JVC KD-MX3000 - Manual (Page 19)

19
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
Select the item you want to adjust.
Indication To do: Range
BASS Adjust the bass –06 (min.) — +06 (max.)
TREBLE Adjust the treble –06 (min.) — +06 (max.)
FADER* Adjust the front and rear speaker R06 (rear only) — F06 (front only)
balance
BALANCE Adjust the left and right speaker L06 (left only) — R06 (right only)
balance
LOUDNESS Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
VOLUME Adjust the volume 00 (min.) — 50 (max.)
ON — OFF
Note:
*
If you are using a two-speaker system, set the fader level to “00” (center).
2
Adjust the level.
Note:
Normally the control dial is used to set the volume. So you do not have
to select “VOLUME” to adjust the volume level.
SEL
BASS TREBLE FADER
BALANCE VOLUME LOUDNESS
1
2
EN 18-20 KD-MX3000 [J]/F 98.10.19, 6:52 PM 19