JVC KD-MX3000 - Manual (Page 6)

6
RADIO BASIC OPERATIONS
Listening to the radio
1
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
Selected band appears.
To search stations
of lower
frequencies.
To search stations
of higher
frequencies.
FM1 FM2 FM3 AM
SSM
FM/AM
When using this unit in an
area other than North or
South America:
You need to change the AM/
FM channel intervals. See
“Changing the AM/FM
channel intervals” on page 25.
1 2
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching:
1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold
¢ or 4 untill “MANU” starts flashing on the display.
Now you can manually change the frequehcy while “MANU” is flashing.
3 Press ¢ or 4 repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing until you release the button.
Scanning broadcast stations
When you press SCAN/RND (Scan/Random) while listening to the radio, station scanning
starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds ("SCAN" appears
on the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
SCAN/RND
EN 06-09 KD-MX3000 [J]/F 98.10.19, 6:35 PM 6