Select audio cruise mode – JVC KD-MX3000 User Manual

Page 27

Advertising
background image

27

ENGLISH

Controlling the volume automatically (Audio Cruise Mode)

You can select the proper cruise mode for your car.
This unit changes the volume level automatically (at 3 possible levels) based on the driving
speed of your car by detecting the alternator’s generating frequency (Audio Cruise).
If you want to use this mode, follow the procedures below. When shipped from the factory, this
mode is set to “OFF.”

Select Audio Cruise mode.

Each time you press the button, the cruise mode changes
as follows:

• CRUISE1:

Select this if your car is relatively quiet.

• CRUISE2:

Select this if your car is relatively loud.
The volume increase rate is twice as much as that of the CRUISE 1
setting.

• OFF:

Cancels Audio Cruise.

1

2

OFF

CRUISE

CRUISE

When this function is turned on (the CRUISE indicator lights up on the display), the proper
volume level is automatically selected among the 3 possible levels according to the driving
speed, and the selected level is shown on the display.

When the driving speed increases.

When the driving speed decreases.

CRUISE

CRUISE

CRUISE

EN 21-32 KD-MX3000 [J]/F

98.10.19, 6:51 PM

27

Advertising