JVC KD-MX3000 - Manual (Page 29)

29
ENGLISH
Assigning names to the sources
You can assign names to station frequencies, CDs and the external component connected to
the LINE IN plugs. After assigning a name, it will appear on the display when you select the
source.
When you select the external
component connected to LINE IN
as the source:
DISP
SEL
When you select a station
frequency as the source:
1
Select a source or a station frequency you want to assign a name
to.
2
Press and hold SEL (Select) for more than 2
seconds while pressing DISP.
When you select the
CD as the source:
CONTINUED TO THE NEXT PAGE
Sources Maximum number of the characters
Station frequencies up to 12 characters (up to 50 station
frequencies including both FM and AM)
CDs up to 32 characters (up to 46 discs)
External component up to 12 characters
7
4
5 3
2
Note:
you cannot assign a name to an MD.
Ex: preset channel 1 of the FM1
band is selected as the station
frequency.
EN 21-32 KD-MX3000 [J]/F 98.10.19, 6:52 PM 29