JVC KD-MX3000 - Manual (Page 20)

20
Storing your own sound adjustments
You can adjust the sound control modes (BEAT, SOFT, POP: see page 18) to your preference
and store your own adjustments in memory.
2
3
1,4
1
Call up the sound control mode you want to
adjust.
See page 18 for details.
2
Select “BASS”, “TREBLE” or “LOUDNESS”.
3
Adjust the bass or treble level or turn the
loudness function ON/OFF.
See page 19 for details.
4
Press and hold SOUND until the sound control
mode you selected flashes on the display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 18.
Within
5 seconds
SOUND
SEL
SOUND
EN 18-20 KD-MX3000 [J]/F 98.10.19, 6:52 PM 20