JVC RX-6030VBK User Manual

Page 63

Advertising
background image

17

English

If the following symptoms occur while playing Dolby Digital or
DTS encoded software with “DIGITAL AUTO” selected,
change the digital input mode.
• Sound does not come out at the beginning of playback.
• Noise comes out while searching or skipping chapters or

tracks.

Press INPUT DIGITAL on the front panel
repeatedly to select “DOLBY DIGITAL” or “DTS
SURROUND.”
• Each time you press the button, the digital input mode

changes as follows:

• To play back software encoded with Dolby Digital, select

“DOLBY DIGITAL.”

• To play back software encoded with DTS Digital Surround,

select “DTS SURROUND.”

Note:

When you turn off the power or select another source, “DOLBY
DIGITAL” or “DTS SURROUND” is canceled and the digital input mode
is automatically reset to “DIGITAL AUTO.”

The ANALOG indicator and digital signal format indicators on
the display indicate what type of signal comes into the
receiver.

ANALOG

Lights when the analog input is selected.

LINEAR PCM

Lights when Linear PCM signals come in.

DIGITAL

• Lights when Dolby Digital signals come in.

• Flashes when “DOLBY DIGITAL” is

selected for software not encoded with
Dolby Digital signals.

• Lights when DTS signals come in.

• Flashes when “DTS SURROUND” is

selected for software not encoded with
DTS signals.

Note:

When “DIGITAL AUTO” cannot recognize the incoming signals, no
digital signal format indicators light up on the display.

Selecting the Analog or Digital Input
Mode

When you have connected digital source components using
both the analog connection (see pages 7 – 9) and the digital
connection (see page 10) methods, you need to select the
input mode correctly.

1

Press one of the source selection buttons—
DVD, TV SOUND, CD, or TAPE/CDR
*—for
which you want to change the input mode.

Note:

* Among the sources listed above, you can select the digital input

only for the sources for which you have selected the digital input
terminals. (See “Selecting the Digital Input Terminals—DIGITAL
IN” on page 16.)

2

Select digital input mode.

On the front panel

Press INPUT DIGITAL.

“DIGITAL AUTO” appears on the display.
The DIGITAL AUTO indicator also lights up.

To change the input mode back to analog input, press
INPUT ANALOG.
“ANALOG” appears on the display for a while.
The ANALOG indicator lights up.

From the remote control

Press ANALOG/DIGITAL.

• Each time you press the button, the input mode

alternates between the analog input (“ANALOG”) and
the digital input (“DIGITAL AUTO”).

DIGITAL AUTO

Select this for the digital input mode.
The receiver automatically detects the
incoming signal format.

ANALOG

Select this for the analog input mode
(initial setting).

DIGITAL AUTO

SPK

ONE TOUCH OPERATION

BASS BOOST

PRO LOGIC DSP

H.PHONE AUTO MUTING TUNED STEREO

TA NEWS INFO

VOLUME

INPUT ATT

EON RDS

SLEEP

CH–

1 2

ANALOG

L

LINEAR PCM

DIGITAL

C

R

S.WFR LFE

LS

RS

S

PHONES

D I G I T A L

P R O L O G I C

D I G I T A L

S U R R O U N D

SURROUND

DSP

SPEAKERS

ON/OFF

SUBWOOFER OUT

FM MODE

MEMORY

ON/OFF

FM/AM TUNING

SURROUND/DSP

OFF

RX–6030V

AUDIO/VIDEO CONTROL RECEIVER

FM/AM RESET

REMOTE CONTROL RM SRX

6030J

DISPLAY MODE

Front panel

Remote control

Source selection
buttons

INPUT DIGITAL

INPUT ANALOG

Source selection
buttons

ANALOG/DIGITAL

DIGITAL AUTO

DOLBY DIGITAL

DTS SURROUND

Remote

NOT

EN11-17_RX-60_5030[C]f

02.12.24, 18:40

17

Advertising