JVC RX-6030VBK - Manual (Page 73)

27
English
Signal and speaker indicators on the display
Signal indicators Speaker indicators
The following signal indicators light up—:
L:
• When digital input is selected: Lights up when the
left channel signal comes in.
• When analog input is selected: Always lights up.
R: • When digital input is selected: Lights up when the
right channel signal comes in.
• When analog input is selected: Always lights up.
C: When the center channel signal comes in.
Using DSP Modes
Speaker layouts required for the DSP modes are as follows:
• 5 channels
(Front, center, and surround speakers
are connected.)
• 4 channels
(Front and surround speakers are
connected.)
7 Operating procedure
1
Start playing 2 channel software—either
analog or Linear PCM—and select the
source.
2
Press DSP.
The last selected DSP mode will be activated and the DSP
indicator lights up on the display.
• Each time you press the button, the DSP mode changes
as follows:
Note:
For the available DSP modes according to input signals, see
“Available Surround/DSP modes for each input signal” on page
25.
To adjust the speaker output level and the effect level for
DAP mode, see pages 19 to 21.
The adjustment is memorized for each source (except for the
effect level).
To turn off DSP mode, press SURROUND/DSP OFF.
LIVE CLUB DANCE CLUB HALL
PAVILION ALL CH STEREO
(All Channel Stereo)
7 Adjustable items and selected Surround/DSP mode
• For adjustment operation, see pages 19 to 21.
Selected Surround/
DSP mode
SURROUND OFF
(stereo)
DOLBY DIGITAL,
DTS SURROUND,
PL II MOVIE
PL II MUSIC
LIVE CLUB,
DANCE CLUB,
HALL,
PAVILION
ALL CH STEREO
(All Channel Stereo)
Adjustable items
FRONT L LEVEL
FRONT R LEVEL
SUBWFR LEVEL
FRONT L LEVEL
FRONT R LEVEL
CENTER LEVEL
SURR L LEVEL
SURR R LEVEL
SUBWFR LEVEL
FRONT L LEVEL
FRONT R LEVEL
CENTER LEVEL
SURR L LEVEL
SURR R LEVEL
SUBWFR LEVEL
PANORAMA CTRL
FRONT L LEVEL
FRONT R LEVEL
SURR L LEVEL
SURR R LEVEL
SUBWFR LEVEL
EFFECT
FRONT L LEVEL
FRONT R LEVEL
CENTER LEVEL
SURR L LEVEL
SURR R LEVEL
SUBWFR LEVEL
Adjustable
range
–10 to +10
–10 to +10
–10 to +10
ON “ OFF
–10 to +10
1 to 5
–10 to +10
LS: When the left surround channel signal comes in.
RS: When the right surround channel signal comes in.
S:
When the monaural surround channel signal comes in.
LFE: When the LFE channel signal comes in.
The speaker indicators light up when the corresponding
speaker is connected and activated.
Notes:
• When “SUBWOOFER YES” is selected for the subwoofer setting
(see page 15) and the subwoofer output is turned on (see page
18),
S.WFR lights up.
• When you select “DVD MULTI” (RX-6030VBK and RX-6032VSL
only), all the signal indicators except “S” light up.
Notes:
• Regardless of the selected Surround/DSP mode,
– You cannot adjust the center speaker output level when the center
speaker size is set to “NONE” (see page 15).
– You cannot adjust the surround speaker output levels when the
surround speaker size is set to “NONE” (see page 15).
• You cannot adjust the subwoofer output level when “SUBWOOFER
NO” is selected for the subwoofer setting (see page 15).
EN24-27_RX-60_5030[C]f 02.12.24, 18:41 27