JVC RX-6030VBK - Manual (Page 65)

19
English
2
Turn MULTI JOG dial to select an item you
want to adjust.
* These items may not be selected depending on how the
following are set:
• Subwoofer setting
• Speaker size setting
• The current Surround/DSP mode
For details, see the next page and “Adjustable items and
selected Surround/DSP mode” on page 27.
3
Press SET.
The current setting of the selected item appears on the
display.
EX.: When “BASS” is selected.
4
Turn MULTI JOG dial to select an appropriate
value.
Adjust the bass sound level within the range of –10 to +10.
EX.: When the bass level is adjusted to “ +4.”
5
Press EXIT.
To adjust other items, repeat steps 2 to 5.
To finish the adjustment, go to step 6.
6
Press EXIT again.
The receiver exits from the sound adjusting mode.
TO BE CONTINUED TO THE NEXT PAGE
Sound Adjustments Using MULTI JOG Dial
You can adjust the sound using MULTI JOG dial on the front
panel.
• Tone—BASS, TREBLE
• Subwoofer output level*—SUBWFR LEVEL
• Speakers’ output level*—
FRONT L/R LEVEL, CENTER LEVEL, SURR L/R LEVEL
• Effect level for DAP modes—EFFECT
• Panorama control for Pro Logic II Music—PANORAMA CTRL
* You can also use the remote control to adjust these items
(see pages 20 and 21).
7 Operating buttons
Buttons To do
ADJUST Enter the receiver into the sound
adjusting mode.
MULTI JOG • Select an item to adjust after pressing
ADJUST.
• Adjust the selected item after pressing
SET.
SET Determine the item to adjust.
EXIT Exit from the sound adjusting mode or
return to the previous step.
DIMMER
INPUT DIGITAL
SETTING MULTI JOG
SET
ADJUST
EXIT
INPUT ANALOG
INPUT ATT
SETTING
MULTI JOG
SET
ADJUST
EXIT
7 Operating procedure
Ex. When adjusting the bass sound
Before you start, remember...
There is a time limit in doing the following steps. If the setting
is canceled before you finish, start again from step
1.
1
Press ADJUST.
The last selected item appears on the display.
BASS TREBLE SUBWFR LEVEL*
FRONT L LEVEL FRONT R LEVEL
CENTER LEVEL* SURR L LEVEL*
SURR R LEVEL* EFFECT*
PANORAMA CTRL* (back to the beginning)
O O O
O O
O O
O O
O
EN18-23_RX-60_5030[C]f 02.12.24, 18:41 19