Ext setting, List – JVC T-V Link AV28CT1EP User Manual
Page 20
19
ENG
L
ISH
AV28CT1EP / LCT1136-001A-U / English
EXT SETTING
EXT SETTING
EXT SETTING
EXT SETTING
To display EXT SETTING menu:
1
Press the
a
a
a
a button to display MENU
(main menu).
2
Press the 6 button to choose EXT SET-
TING. Then press the
a
a
a
a button.
■
■
■
■
y
y
y
y
(S-VIDEO input)
(S-VIDEO input)
(S-VIDEO input)
(S-VIDEO input)
When connecting a device (such as S-VHS VCR) which ena-
bles an S-VIDEO signal (Y/C signal) to be output, you can en-
joy high-quality picture of the S-VIDEO signal (Y/C signal).
Preparation:
• At first, read the Device Instruction Manual and “ADDITION-
AL PREPARATION” on page 30 to connect the device to the
TV properly. Second, follow the Device Instruction Manual
to set the device so that a S-VIDEO signal (Y/C signal) can
be output to the TV.
• Do not set y
y
y
y(S-VIDEO input) to the EXT terminal con-
nected to a device which cannot output a S-VIDEO (Y/C sig-
nal). If it is set wrongly, a picture cannot appear.
1
Press the
6 buttons or 5 buttons to
choose an EXT terminal.
2
Press the yellow button and set the y
y
y
y
(S-VIDEO input).
A y
y
y
y (S-VIDEO input) mark is displayed. You can view
an S-VIDEO signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the
y
y
y
y
(S-VIDEO input) setting:
Press the yellow button and turn off y
y
y
y (S-VIDEO in-
put) mark.
The regular video signal (composite signal) pictures are
resumed.
3
Press the
a
a
a
a button to complete the set-
ting.
The menu disappears.
Note:
• The EXT-1 terminal does not support S-VIDEO signal
(Y/C signal) and you cannot set y
y
y
y (S-VIDEO input)
in the EXT-1 terminal.
• Setting y
y
y
y (S-VIDEO input) changes the head
character from “E” to “S”. For example, “E2” is
changed to “S2”.
• Even an device which enables the S-VIDEO signal (Y/
C signal) to be output may output a regular video sig-
nal (composite signal) depending on the device set-
ting. If a picture cannot appear because y
y
y
y (S-
VIDEO input) setting has been made, read the device
Instruction Manual carefully again to check for the de-
vice settings.
■
■
■
■
LIST
LIST
LIST
LIST
You can have a name corresponding to the devices connect-
ed for each EXT terminal. Giving a name to an EXT terminal
makes the EXT terminal number appear on the screen, to-
gether with the name.
1
Press the
6
buttons or
5
buttons to
choose an EXT terminal.
2
Press the blue button to display the name
list (LIST).
P
P
EXT-1
EXT-3
EXT-2
EXT-4
TV
P
P
EXT-1
EXT-3
EXT-2
EXT-4
TV
AV28CT1EP_EN.book Page 19 Tuesday, December 18, 2001 1:20 PM