JVC T-V Link AV28CT1EP - Manual (Page 45)

8
AV28CT1EK/EI / LCT1138-001A-U / English
Using your TV–the basics Using your TV–the basics Using your TV–the basics Using your TV–the basics
■ ■ ■ ■ Turn the main power on Turn the main power on Turn the main power on Turn the main power on
Press the main power button on the TV
The power lamp lights red and your TV is in the standby mode.
If the power lamp lights green, the TV is already on.
To turn the main power off:
Press the main power button again.
The power lamp goes off.
The main power button on the TV does not fully cut the TV off
from the mains supply. If you are not going to use this TV for a
long time, be sure to pull the mains plug out of the mains outlet.
■ ■ ■ ■ Turn the TV on from standby mode Turn the TV on from standby mode Turn the TV on from standby mode Turn the TV on from standby mode
Press the
#
(standby) button, the
b
button, the 6 buttons or the number
buttons
The power lamp goes from red to green and your TV will be
turned on.
To turn the TV off:
Press the # (standby) button again.
The power lamp changes from green to red and the TV goes
into standby mode.
■ ■ ■ ■ Choose a TV channel Choose a TV channel Choose a TV channel Choose a TV channel
Choose the programme number (PR) that the TV channel has
been set to.
Use the 6 buttons:
Press the 6 buttons to choose the programme number
(PR) you want.
Use the number buttons:
Enter the programme number (PR) of the channel using the
number buttons.
Example
• PR12 → press 1 and 2.
• PR6 → press 6.
Use the PR LIST:
1 Press the
h
(information) button to
display the PR LIST
main power button
power lamp
1 2 3
4 5 6
7 8 9
0
P
AV
TV OK
MENU
P
FREEZE
SUB-P
F.T/L
TV
number
buttons
AV28CT1EKEI.book Page 8 Tuesday, December 18, 2001 10:20 AM