JVC T-V Link AV28CT1EP - Manual (Page 55)

18
AV28CT1EK/EI / LCT1138-001A-U / English
Picture features Picture features Picture features Picture features
To display the PICTURE FEATURES menu:
1 Press the
a
button to display MENU
(main menu)
2 Press the 6 buttons to choose PICTURE
FEATURES, and press the
a
button
■ ■ ■ ■ AUTO VNR AUTO VNR AUTO VNR AUTO VNR
VNR Stands for “video noise reduction”.
The AUTO VNR function reduces any “noise” (interference or
snowing) in the current picture. The function also adjusts the
optimum Sharpness of the picture (SHARP).
1 Press the 6 buttons to choose AUTO
VNR
2 Press the 5 buttons to choose AUTO
MIN:
The AUTO VNR function is cancelled. When you set the
mode to AUTO but feel that the sharpness of the original
picture has not been reproduced fully, change the mode
to MIN. However, any noise remaining in the original
picture may be emphasized.
MAX:
This mode always reduces any noise as much as
possible, irrespective of state of the picture. When you
set the mode to AUTO but still notice some noise,
change the mode to MAX. However, this may reduce the
sharpness of the picture.
3 Press the a a a a button to complete the
setting
The menu disappears.
■ ■ ■ ■ COLOUR SYSTEM COLOUR SYSTEM COLOUR SYSTEM COLOUR SYSTEM
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
1 Press the 6 buttons to choose COLOUR
SYSTEM. Then press the
a
button
The sub-menu of the COLOUR SYSTEM function
appears.
2 Press the 5 buttons to choose the
appropriate colour system
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input
signal. You can only use this when you are viewing a
picture from programme number PR 0 (AV), or an EXT
terminal.
3 Press the
a
button to complete the
setting
The menu disappears.
• The AUTO function may not work properly if you
have poor signal quality. If the picture is abnormal in
the AUTO function, choose another colour system
manually.
• You cannot choose NTSC 3.58 or NTSC 4.43 for
programme numbers PR 0 (AV) to PR 99.
JVC TV_MF2.fm Page 18 Friday, December 21, 2001 2:48 PM