JVC T-V Link AV28CT1EP - Manual (Page 60)

23
AV28CT1EK/EI / LCT1138-001A-U / English
FEATURES FEATURES FEATURES FEATURES
To display the FEATURES menu:
1 Press the
a
button to display the MENU
(main menu)
2 Press the 6 buttons to choose
FEATURES. Then press the
a
button
■ ■ ■ ■ SLEEP TIMER SLEEP TIMER SLEEP TIMER SLEEP TIMER
You can set the TV to automatically turn off after a set time.
1 Press the 6 buttons to choose SLEEP
TIMER. Then press the
a
button
A sub-menu of the SLEEP TIMER function appears.
2 Press the 5 buttons to set the period of
time
You can set the time for up to 120 minutes (2 hours) in
10 minute steps.
To cancel the SLEEP TIMER function:
Press the 2 button to set the period of time to “OFF.”
3 Press the
a
button to complete the
setting
The menu disappears.
• One minute before the SLEEP TIMER function turns
off the TV, “GOOD NIGHT!” appears.
• The SLEEP TIMER function cannot be used to turn
off the TV’s main power.
• When the SLEEP TIMER function is on, you can
display the sub-menu of the SLEEP TIMER function
again to confirm or change the remaining period of
time of the SLEEP TIMER function. Press the
a
button to leave the menu after confirming or
changing the remaining time.
■ ■ ■ ■ BLUE BACK BLUE BACK BLUE BACK BLUE BACK
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.
1 Press the 6 buttons to choose BLUE BACK
2 Press the 5 buttons to choose ON
To cancel the BLUE BACK function:
Press the 5 buttons to choose OFF.
3 Press the
a
button to complete the setting
The menu disappears.
■ ■ ■ ■ CHILD LOCK CHILD LOCK CHILD LOCK CHILD LOCK
When there is a TV channel you do not want your children to
watch, you can use the CHILD LOCK function to lock out the
TV channel. Even when a child chooses a programme
number (PR) for a locked TV channel the screen will change
to blue and display
n (CHILD LOCK) so the TV channel
cannot be viewed. Unless you enter a pre-set ID number by a
special operation, the lock cannot be released and the child
cannot view the TV channel.
To set the CHILD LOCK function To set the CHILD LOCK function To set the CHILD LOCK function To set the CHILD LOCK function
1 Press the 6 buttons to choose CHILD
LOCK. Then press the o button
“SET ID NO.” (ID number setting screen) appears.
2 To set the ID number you want
1 Press the 6 buttons to choose a number
2 Press the 5 buttons to move the cursor
3 Press the
a
button
The sub-menu of CHILD LOCK appears.
4 Press the 6 buttons to choose a TV channel
Every time you press the 6 buttons, the programme
number (PR) changes, and the picture of the TV channel
registered in the programme number (PR) is displayed
on the screen.
AV28CT1EKEI.book Page 23 Tuesday, December 18, 2001 10:20 AM