JVC T-V Link AV28CT1EP - Manual (Page 67)

30
AV28CT1EK/EI / LCT1138-001A-U / English
Other menus Other menus Other menus Other menus
■ ■ ■ ■ Downloading data to a VCR Downloading data to a VCR Downloading data to a VCR Downloading data to a VCR
You can send the latest programme numbers (PR) data to a
VCR with the T-V LINK function.
• You can only do this when a T-V LINK compatible VCR is
connected to the EXT-2 terminal.
• This only works when the T-V LINK menu is being
displayed.
1 Turn on the VCR
2 Press the
a
button
The data transmission begins.
The T-V LINK menu disappears once the data
transmission ends.
When the T-V LINK menu changes over to
another menu:
The TV has finished its menu. This new menu is
opperated from the VCR. See the VCR instruction
manual for what to do next.
• If “FEATURE NOT AVAILABLE” appears at the T-V
LINK menu, check the following three items. Then
press the
a button to retry data transmission.
− Has a T-V LINK compatible VCR been
connected to the EXT-2 terminal?
− Has the VCR power been turned on?
− Does the SCART cable that connects the EXT-2
terminal to the T-V LINK compatible VCR have all
its proper connections?
■ ■ ■ ■ Using the DECODER (EXT-2) Using the DECODER (EXT-2) Using the DECODER (EXT-2) Using the DECODER (EXT-2)
function function function function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT-2 terminal, use
the DECODER (EXT-2) function to unscramble the
scrambled TV channels.
1 Turn on the decoder power
2 Display the scrambled TV channel on the
TV
Even if the decoder is working, a scrambled picture
appears.
3 Press the
a
button to display the MENU
The MENU (main menu) appears.
4 Press the 6 buttons to choose
FEATURES. Then press the
a
button
The FEATURES menu appears.
5 Press the 6 buttons to choose
DECODER (EXT-2) . Then press the 5
buttons to choose ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2) function:
Press the 5 buttons to choose OFF.
6 Press the
a
button to complete the
setting
The T-V LINK menu appears.
7 Follow “Downloading data to a VCR” on
page 30 to transmit the programme
number (PR) data to the VCR
8 If you have another TV channel you want to
unscramble using a decoder, repeat steps
2 to 7.
• If the DECODER (EXT-2) function has been set to
“ON” but the TV channel cannot be unscrambled,
check the following:
− Has the decoder been connected to the VCR
properly according to the VCR and decoder
instruction manuals?
− Has the decoder power been turned on?
− Can the TV channel be unscrambled with a
decoder?
− Do you need to change the VCR settings in order
to connect the decoder? Confirm that the VCR is
set properly by rechecking the VCR Instruction
manual.
AV28CT1EKEI.book Page 30 Tuesday, December 18, 2001 10:20 AM