Changing the volume, Watching images from – JVC T-V Link AV28CT1EP User Manual

Page 46

Advertising

Using your TV–the basics

AV28CT1EK/EI / LCT1138-001A-U / English

Press the 5 and 6 buttons to choose
a programme number (PR). Then press the
a button

• For programme numbers (PR) where you have the CHILD

LOCK function set, the

(CHILD LOCK) mark appears

next to the programme number (PR) in the PR LIST.

• You cannot use the

buttons to choose a programme

number (PR) which has the CHILD LOCK set.

• Even if you try to choose a programme number (PR) with

the CHILD LOCK set, the

(CHILD LOCK) mark will

appear, and you cannot watch the TV channel. To watch
the TV channel, see “CHILD LOCK” on page 23.

• If you do not have a clear picture or no colour appears,

change the colour system manually. See “COLOUR
SYSTEM” on page 18.

■

Changing the volume

Press the 5 buttons to change the
volume.

The volume indicator appears, and the volume changes, as
you press the q buttons.

■

Watching images from

external equipment

Choose the EXT terminal that the external equipment has
been connected to.

Use the

button:

Press the

button to choose an EXT terminal.

Pressing the

button changes the choice as follows:

Use the 6 buttons:
Press the 6 buttons to choose an EXT terminal

Use the PR LIST:

Press the

(information) button to

display the PR LIST

Press the 5 and 6 buttons to choose
an EXT terminal. Then press the

button

• The EXT terminals are listed after programme number PR

99.

• You can choose two types of video input signal:

S-VIDEO (Y/C signal) and regular video (composite
signal). For details, see “y (S-VIDEO input)” on
page 21.

• If you do not have a clear picture or no colour appears,

change the colour system manually. See “COLOUR
SYSTEM” on page 18.

• If you choose an EXT terminal with no input signal, the

EXT terminal number becomes fixed on the screen.

• This TV set can automatically change over the input

according to a special signal from an external device.
(The EXT-4 terminal does not support it.)

To use the programme number PR 0 (AV):
When the TV and VCR are connected only by the aerial cable,
choosing the programme number PR 0 (AV) allows you to
view images from the VCR. Set the VCR RF channel to
programme number PR 0 (AV) manually. For details, see
“EDIT/MANUAL” on page 26.
Pressing the

button changes the choice as follows:

• The VCR sends its playback image along the aerial cable

as an RF (radio frequency) signal.

• Also see your VCR instruction manual.

To return to a TV channel:
Press the

button, the 6 buttons or the number

buttons.

EXT-1

EXT-4

EXT-2

EXT-3

TV mode

EXT modes

Programme

numbers

PR 1 to PR 99