SMC Networks SMC2804WBR V.2 - Manual (Page 11)

Installing the Wireless Barricade™ g Router
8
System Requirements
You must have an ISP that meets the following minimum
requirements:
• Internet access from your local telephone company or Internet
Service Provider (ISP) using a DSL modem or cable modem.
• A PC using a fixed IP address or dynamic IP address assigned
via DHCP, as well as a Gateway server address and DNS
server address from your service provider.
• A computer equipped with a 10 Mbps, 100 Mbps, or
10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet
converter.
• TCP/IP network protocol installed on each PC that needs
to access the Internet.
• A web browser, such as Microsoft Internet Explorer 5.0 or
above installed on one PC at your site for configuring the
Wireless Barricade™.
Connect the System
The Wireless Barricade™ can be positioned at any convenient
location in your office or home. No special wiring or cooling
requirements are needed. You should, however comply
with the following guidelines:
• Keep the Wireless Barricade™ away from any heating
devices.
• Do not place the Wireless Barricade™ in a dusty or wet
environment.
You should also remember to turn off the power, remove the
power cord from the outlet, and keep your hands dry when
you install the Wireless Barricade™.