SMC Networks SMC2804WBR V.2 - Manual (Page 57)

Advanced Setup
55
Wireless
To configure the Wireless Barricade™ as a wireless access point
for wireless clients (either stationary or roaming), all you need to
do is define the radio channel, the Service Set identifier (SSID),
and encryption options.
Channel and SSID
You must specify a common radio channel and SSID (Service
Set ID) to be used by the Wireless Barricade™ and all of your
wireless clients. Be sure you configure all of your clients to
the same values.
SSID: The Service Set ID. This should be set to the same value
as the other wireless devices in your network. (Default: SMC.)
Note: The SSID is case sensitive and can consist of up
to 32 alphanumeric characters.
SSID Broadcast: Broadcasting the SSID on the wireless network
for easy connection with client PCs. For security reason, disable
SSID broadcast. (Default: Enable.)