SMC Networks SMC2804WBR V.2 User Manual
Page 16
Advertising
![background image](/manuals/135592/16/background.png)
Connect the System
13
Note:
When connecting to the WAN port, use 100-ohm
Category 3, 4, or 5 shielded or unshielded twisted-
pair cable with RJ-45 connectors at both ends for
all connections.
Connecting the Power Adapter
Plug the power adapter into the power socket on the Wireless
Barricade™, and the other end into a power outlet. Check the
indicator marked "PWR" on the front panel to be sure it is on.
If the power indicator does not light, refer to "Troubleshooting"
on page 79.
Advertising