SMC Networks SMC2804WBR V.2 - Manual (Page 31)

29
C
ONFIGURING THE
W
IRELESS
B
ARRICADE
™
G
R
OUTER
The Wireless Barricade™ g Router can be configured by Internet
Explorer 5.0 or above. Using the web management interface,
you can configure the Wireless Barricade™ and view statistics
to monitor network activity.
Note: Before you attempt to configure your router, if you have
access to the Internet please visit
www.smc.com or
www.smc-europe.com and download the latest firmware
update to ensure your Wireless Barricade™ is running
the latest firmware.
Before you attempt to log into the web-based Administration,
please verify the following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer
is plugged into the Wireless Barricade™. If you don’t have
a link light, then try another cable until you get a good link.
Browser Configuration
Confirm your browser is configured for a direct connection to the
Internet using the Ethernet cable that is installed in the computer.
This is configured through the options/preference section of your
browser.