SUUNTO X6 - Manual (Page 19)

17
4. Press Suunto. The alarm indicator changes to on and the hour selection is acti-
vated.
5. Set the correct hour with the arrow buttons and press Suunto. The minute selec-
tion is activated.
6. Set the correct minutes with the arrow buttons and press Suunto.
7. If you want the alarm to sound every day, accept the dd.mm format by pressing
Suunto. (A long press takes you back to the main display. Two short presses first
activate the mm field and then take you to the Function menu.) The alarm is set to
sound every day and you return to the Function menu.
8. If you want to set the alarm for a specific date, set the day and month in the dd and
mm fields with the arrow buttons and accept the date by pressing Suunto. The
alarm is set to sound only once on the selected date and you return to the Function
menu. To set the alarm back to daily function, activate the mm field and set its value
back to mm with the arrow buttons and accept the setting with Suunto.
Deactivating alarms
To deactivate the alarm:
1. In the Function menu, scroll to Alarm and press Suunto.
2. Scroll to the alarm you want to set off and press Suunto. The alarm information is
displayed and the On/Off indicator is activated.
3. Press either the up or down button to change the alarm status to off and press
Suunto. The alarm symbol disappears from the display.
Acknowledging alarms
When you hear the alarm, you can acknowledge it by pressing any of the Suunto X6/
X6M buttons. The alarm stops automatically after 30 seconds.