SUUNTO X6 - Manual (Page 32)

30
3. Select the correct option (Off/East/West) with the arrow buttons and press Suunto.
The degrees field is activated.
4. Set the degree with the arrow buttons. The initial value is either 0.0° or the value
accepted when last setting the declination.
5. Press Suunto. You return to the compass menu.
3.3.5. Slope
The slope function is intended for measuring the degree of slope.
To measure the slope:
1. In the Function menu, scroll to Slope with the arrow buttons and press Suunto.
When you incline the Suunto X6/X6M, it starts to display the angle indicating the
degree of slope on the screen.
2. When the angle is selected, lock it by pressing Start. The angle remains on display.
3. To unlock the angle and start measuring the slope again, press Start.
4. To move back to the Function menu, press Suunto.
NOTE: The measured value is not saved in the Suunto X6/X6M memory in the
Compass mode.