Sony DVX-100 - Manual (Page 46)

46
Completeing setup
OSD message
You can turn the indicator display of indicators (Example:
N
, x, M, m, X) “on” or “off.” The indicators are
displayed when you press the buttons during a DVD or
Video CD playback.
1 See “Selecting items for setup” (page 36) first.
Follow steps 1 to 4 on page 36, then proceed below to
complete your setup.
2
Select “OSD message,” then press ENTER.
The setup screen for OSD message is displayed.
The currently selected item is highlighted in yellow.
3
Press the cursor buttons (V/v) to select “On”
(displayed) or “Off” (not displayed).
4
Press ENTER.
The setup screen reappears automatically.
You can check that your selection under “OSD
message.”
To end or drop the setup change and resume
playback
1 Press SET UP.
The playback screen with the indicator “x” on
appears. Resuming playback is still activated.
2 Press PLAY to start playback.
• DVD/Video CD
The disc plays from the beginning*.
* If the resume playback is still activated, the disc plays
from the point you stopped playback.
• Audio CD
The disc plays from the point you stopped
playback.
Notes
• If you want to return to the setup screen (page 36) while
completing the setup change, press RETURNO or B.
• If you forget your registered password, enter “5534,” then
complete the following steps.
On
OSD Message
Off
Audio Language Original
Set Up
DVD Menu Language Original
Subtitle Language
Digital Output
Display
Parental
OSD Message
Player Language
Original
LPCM
4:3 Letter Box
8
Off
English