Sony MK7807V1 - Manual (Page 121)

119
Interface Processor D Series
Inter
face Pr
ocessor D Series
Supplied Accessories
Operation manual (1)
Installation manual (1)
Optional Accessories
RMM-30 Rack Mount Rail
Optional Boards
BKPF-012A 525-line component digital to
NTSC composite analog/digital video
converter board
BKPF-021 NTSC Composite Digital to
525-Line Component Digital Video Converter
Board
BKPF-205 Audio/Video Multiplexer Board
BKPF-206 Audio/Video Demultiplexer Board
BKPF-300 Digital Video Selector Board
BKPF-301 Analog Video Selector Board
BKPF-350 Digital Audio Selector Board
BKPF-351 Analog Audio Selector Board
BKPF-R70A Routing Switcher Controller
Board
Optional Software
BZR-IF310 S-BUS SUB-NET Controller
Software
Optional Peripherals
BKPF-PS50A Backup Power Supply Unit
Specifications
Output
STATUS OUT:
D-sub 25-pin
General
Power requirements:
100 to 240 V AC, 50/60 Hz
Power consumption:
100 V AC: max. 1.8 A
240 V AC: max. 0.9 A
Maximum power supply capacity:
+5 V DC: max. 8 A
For installed boards -5 V DC: max. 8 A
Operating temperature:
5 to 40 °C (41 to 104 °F)
Storage temperature:
-20 to 60 °C (-4 to 140 °F)
Operating humidity:
10 to 90%
Dimensions (W x H x D)
424 x 132 x 428 mm
(16 3/4 x 5 1/4 x 16 7/8 inches)
Mass:
Approx. 8 kg (17 lb 10 oz)
(not including the optional boards)
The total power consumption of the four installed
function boards should not exceed 8 A at 5 V and
8 A at -5 V.
BKPF Series boards provide a wide range of audio and
video signal processing and distribution functions for
analog and digital signals. The PFV-D50A digital video
interface unit accommodates up to four of these boards,
providing an interface for system connections. One of
these boards can be a BKPF-500, providing an interface
to an ISR system. The PFV-D50A supplies power to the
boards, an optional BKPF-PS50A backup power supply
can be installed for critical applications. BNC connectors
for a looped video reference signal input and S-BUS
remote control are provided, together with an ISR Status
Out connector. The PFV-D50A mounts into a standard
19-inch rack and is 3U high.
Features
* Accommodates and powers four BKPF Series boards *
S-BUS control and reference video connectors *
Redundant power supply option * Supports ISR
PFV-D50A
Digital Video Interface Unit
Rear Panel
*SGC_0117-0132 02.3.16 5:05 PM Page 119