Sony MK7807V1 - Manual (Page 29)

Applicable Models
BVS-A3232 Analog Audio Routing Switcher
BVS-V3232 Analog Video Routing Switcher
DVS-128 Routing Switcher
DVS-RS1616 RS-422A Remote Routing
Switcher
DVS-TC3232 Time Code Routing Switcher
HDS-X3400 Multi Bit-Rate Routing Switchers
HDS-X3600 Multi Bit-Rate Routing Switchers
HDS-X3700 Multi Bit-Rate Routing Switchers
HDS-X5800 Multi Bit-Rate Routing Switcher
Supplied Accessories
Operation and maintenance manual (1)
BNC T-bridge connector (1)
Specifications
Control signal
REMOTE 1:
S-BUS (BNC type) (1)
Data transfer method: BI-PHASE SPACE
Data transfer rate: 312.5 kb/s
Max. cable length 500 m (when using
Belden 8281, Fujikura 5C2V or
equivalent 75
Ω coaxial cable).
Expandable to 1000 m with a
BKPF-L803 S-BUS Isolator/Expander
REMOTE 2:
D-sub 9-pin (1)
Data transfer method: Conforms to the
EIA RS-422A Cart+
Data transfer rate: 38.4 kb/s
RS-232C:
D-sub 9-pin male (1)
Data transfer method: 8-bit, no parity, 1
stop bit
Data transfer rate: 19.2 kb/s
General
Power requirements:
100 to 240 V AC, 50/60 Hz
Current consumption:
0.25 A
Operating temperature:
0 to 45 °C (32 to 113 °F)
Dimensions (W x H x D):
440 x 44 x 120 mm
(17 3/8 x 1 3/4 x 4 3/4 inches)
Mass:
Approx. 1.5 kg (3 lb 5 oz)
The BKS-R3220 X-Y control unit controls matrix cross
points in routers connected to an S-BUS system. Any
combination of inputs and outputs, pre-defined with the
control terminal, are controllable with a single ‘take’
button. The names of the selected sources and
destinations are shown on the front panel displays. The
shallow depth of the unit makes it easy to accommodate
the BKS-R3220 in front of a desk-mounted switcher
control panel.
Features
* Router control in S-BUS systems * Fully compliant with
expanded S-BUS systems * Two source/destination
selection systems available * BPS (D) Selection
(Button-Per-Source or Destination) * Type plus Number
Selection * Button re-assignment using the Selector knob
* Improved monitor function for the selection of
destinations * Alternate source switching using Chop
function * Sources selectable to levels * Sources
searched by category * Access can be restricted to a
defined block of crosspoints * Large selector buttons show
source and destination name (Status shown by button
color) * Several crosspoints switchable with a single
button (Phantom function) * Route function for expanded
sources * Number of sources and destinations controlled
expandable with additional units * Control bridge between
RS-422A (cart+ protocol) and S-BUS * Easy ROM update
* Single cable connection * Reduced depth helps in desk
mounting applications
BKS-R3220
X-Y Control Unit
Rear Panel
27
Routing Switchers
Routing Switchers
*SGC_0011-0038 02.3.16 5:00 PM Page 27