Sony CDP-CE505 - Manual (Page 14)

Recording From CDs
14
7
When you record on side B, reverse the tape and
press · or P on the player to resume playing.
To cancel Time Edit
Press CONTINUE.
You can program the tracks you want in advance
Select the tracks before doing the above procedure. The
player creates a program from the remaining tracks.
You can freely specify the tape length
Set the tape length using number buttons. To enter “0,”
use button 10.
Example: When the tape length of one side is 30 minutes
and 15 seconds
Press 3, 10, 1 and 5.
You can check and change the program
See page 12.
When track numbers flash in Step 3 or 4
(CDP-CE505 only)
This means that there is a portion remaining on the
tape after the player has programmed all the tracks so
that you can add more tracks to the portion (Link Edit).
You can also select another disc and add the tracks on
the disc you select if the tracks on the current disc are
shorter than the remaining time.
Press EDIT/TIME FADE to have the player add the
tracks, or press number buttons of the tracks flashing
in the display. When you want to add tracks on
another disc, press DISC SKIP to select the disc, and
then press number buttons of the track. After adding
the tracks, press · to start playing.
If you don’t need to add tracks, just press · to start
playing.
When “B” in the A B indication flashes
This means that more than 1 minute remains on the tape
but no track on the current disc fits the remaining
portion. If you add tracks on other discs, select the disc
you want and follow the procedure above.
Fading In or Out
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
EDIT/TIME FADE*
≠/± ·
Number buttons FADER**
FADER
Number buttons
=/+
(
(CDP-CE505 and
CDP-C450Z only)
Press FADER
During pause. FADE lights up in
the display and the Q indication
flashes. The play fades in.
When you want to start fading out.
FADE lights up in the display and
the q indication flashes. The play
fades out and the player pauses.
To
Start play fading in
End play fading out
Note
Fading lasts for about 5 seconds. However, when you press
FADER during Music Scan (see page 10), the play fades out
for about 2 seconds.
Changing the fading time
(CDP-CE505 and CDP-C450Z only)
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
1
Press FADER on the remote before you start
playing.
*except for CDP-C450Z, CDP-C350Z and CDP-C250Z
**except for CDP-CE505 and CDP-C450Z