Sony CDP-CE505 - Manual (Page 7)

7
Basic Operations
Basic Operations
Press
P
P or ·
±
≠
DISC SKIP
DISC 1–5
§␣ OPEN/CLOSE
6 Press ·.
The disc tray closes and the player plays all the tracks once
(Continuous Play). Adjust the volume on the amplifier.
You can select the disc you
want to start playing first
Press one of the DISC 1–5
buttons.
When listening with the
headphones (CDP-CE505 and
CDP-C450Z only)
Connect the headphones to
the PHONES jack on the
player and adjust the
volume with the PHONE
LEVEL control on the player
or with the LINE OUT
LEVEL +/– buttons on the
remote.
You can adjust the output
level to the amplifier (except
for CDP-CE305, CDP-C250Z
and CDP-C661)
Press LINE OUT LEVEL +/–
on the remote. You can
reduce the output level up to
–20␣ dB.
When you reduce the output
level,
FADE appears in the
display.
When you turn off the
player, the output level
automatically returns to the
maximum level.
Note
If you press the LINE OUT
LEVEL +/– buttons on the
remote while recording, the
recording level will change even
when it is preset on the tape
deck, etc. (except for CDP-CE305,
CDP-C250Z and CDP-C661).
To stop playback
Press p.
To
Pause
Resume play after pause
Go to the next track
Go back to the preceding track
Go to the next disc
Select a disc directly
Stop play and remove the CD
DISC 1–5 · ≠/ ± p P
DISC SKIP § OPEN/CLOSE