Sony VAIO Digital Studio PCV-RX270DS User Manual
Page 32
VAIO Digital Studio™ User Guide
32
A 6-pin i.LINK connector can
❑
supply power from the computer to the connected device if the device is
equipped with a 6-pin connector, and
❑
supply 10V to 12V.
A 4-pin i.LINK connector cannot supply power to a connected device.
The following Sony i.LINK 400 Mbps cables are available and recommended for
use with your computer: VMC-IL4415, VMC-IL4435, VMC-IL4615,
VMC-IL4635, VMC-IL6615, and VMC-IL6635. Sony computer supplies,
accessories, and peripherals can be purchased from your local retailer or by
accessing the Sony VAIO Direct Web site (http://vaio.sonystyle.com/), or by
calling 1-888-315-7669 (toll free).
To connect an i.LINK (IEEE1394) device
❑
Use the symbol to locate the i.LINK
connector. Plug the i.LINK cable into
this connector.
!
The total power supplied by the 6-pin i.LINK connector cannot exceed 6 watts.
Connecting an i.LINK device
✍
The Windows Me i.LINK communication standard is not compatible with the Sony
VX1000 camcorder. See the manual that came with your i.LINK-equipped device for
more information on installation and use.