Sony VAIO Digital Studio PCV-RX270DS User Manual
Page 48
VAIO Digital Studio™ User Guide
48
Topic: My i.LINK
®
device does not appear on the desktop
1
Turn off and disconnect your device.
2
Reconnect your device.
3
Then turn on the power.
Topic: My connected printer doesn't function after the computer resumes from
a power saving mode
When this occurs, follow the procedures below to reset the printer connection:
1
Right-click the My Computer icon on the desktop, and then select
Properties.
2
Click the Device Manager tab.
3
Select Refresh, and then click OK.
4
The printer should now function properly.
Topic: How do I enable my Ethernet interface?
1
Right-click My Computer on the desktop and select Properties.
2
Click the Device Manager tab.
3
Select “Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC” under the
Network Adapters category.
4
Click Properties.
5
Click Enable Device and then click OK.
6
Click Close.
Topic: How do I install a printer?
✍
Always check the printer manufacturer's website for the latest drivers for Windows®
Me before proceeding. Some printers do not function properly without updated
drivers for Windows Me.