Siemens Gigaset C340 - Manual (Page 16)

15
Using the directory and lists
Gigaset C340 / Im-eng / A31008-M1621-R101-1-7619 / directories.fm / 23.11.04
Setting the message key flashing
Requirement: There is still at least one
new entry in one of the lists.
f
Open the calls list.
Select Set MWI-LED and
press §OK§ .
a Long press (idle status).
Key f goes out when a list opens and the
menu is closed.
Calls list
Requirement: CLIP (page 10)
The numbers of the last 30 incoming calls
are stored. Depending on the Calls List Set-
tings either All Calls or only Missed Calls are
stored (page 15).
Several calls from the same number are
stored depending on the type of list:
u All Calls stored more than once.
u Missed Calls stored once (the last call).
The calls list is displayed as follows:
Number of new entries + number of old, read
entries
Setting the list type for the calls list
f
¢
Calls List: 01+02
¢
q (select entry; page 12)
¢
§Menu§
¢
Calls List Settings
Select Missed Calls / All Calls
and press §OK§ ( ‰ = on).
a Long press (idle status).
The entries in the calls list are retained
when you change the list type.
Opening the calls list
f
¢
Calls List: 01+02
q Select an entry.
The calls list shows the last received call.
List entry
Example of a list entry:
u Status of the entry
In the calls list
New Call : new missed call.
Old Call : entry already read.
Call recv. : the call was taken (only with
list type All Calls ).
u Sequence number of the entry
01/02 means e.g.: First of a total of two
entries.
u Caller's number or name
You can copy the caller's number to the
directory (page 13).
u Call date and time (if set, page 7).
Pressing §Menu§ gives you the following
option:
Delete Entry
The current entry is deleted.
Deleting the calls list
Caution! All old and new entries will be
deleted.
f
¢
Calls List:
¢
§Menu§
¢
Delete List
a Long press (idle status).
Calls List: 01+02
New Call 01/02
1234567890
28/08/04
17:53
§Back§
U
§Menu