Sharp VL-NZ100S - Manual (Page 49)

Useful Features
38
Using the Remote
Control
Available modes:
TAPE-CAMERA, TAPE-VCR
Use the remote control to operate the
camcorder from a distance, such as when you
want to record yourself in a scene, or when the
camcorder is connected to a TV for use as a
VCR.
Installing the Batteries
1
Open the battery compartment cover.
2
Insert the two supplied AA (R6 or UM/
SUM-3) batteries with the battery poles
positioned as indicated.
3
Place the cover.
Activating
1
In TAPE-VCR (or CARD-VCR) mode,
press the MENU button until the menu
screen appears.
2
Press l or m on the operation button
to select I, then press the SET button.
3
Press l or m to select “REMOTE”,
then press the SET button.
4
Press l or m to select “ON”, then press
the SET button.
5
Press the MENU button to turn off the
menu screen.
Operating
Aim the remote control at the remote sensor of
the camcorder, and press the control buttons to
operate.
Notes:
• Do not use old and new batteries together or
batteries of different brands together.
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as this
may prevent the remote control from operating
properly.
• Be sure that there are no obstacles between the
remote control and the remote sensor.
Useful Features
Playback
REMO T E ON
O N
O F F
O T H E R S
B E E P
R E MO T E
T I ME C O D E
T C OU T
R E T U RN
Remote sensor
Approximate operating
range of remote control
ZOOM buttons (W/T)
SLOW button
PLAY button
STOP button
PAUSE/STILL button
REW button
FF button
VOLUME +/L buttons
REC START/STOP button
1 2
5 m
VL-NZ100H-038-041 02.2.14, 10:01 AM 38