Sharp VL-NZ100S - Manual (Page 58)

Advanced Features
Playback
Advanced Features
47
Using the Time Code
Available modes:
TAPE-VCR, TAPE-CAMERA
The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/25 sec.). This is automati-
cally recorded along with the subject when you
are recording on the tape. You can display the
time code on the screen as an accurate
counter in both TAPE-VCR and TAPE-CAMERA
modes.
Display format
• The example screens shown are for TAPE-VCR
mode.
1
During playback or camera recording in
TAPE modes, press the MENU button
until the menu screen appears.
2
Press l or m on the operation button
to select I, then press the SET button.
3
Press l or m to select “TIME CODE”,
then press the SET button.
4
Press l or m to select “DISP. ON”, then
press the SET button.
0 0 0 1 0 2 0 T C
D I S P .
D I S P .
O F F
ON
O T H E R S
B E E P
R E MO T E
T I ME C O D E
T C OU T
R E T U RN
Advanced Features
Playback
5
Press the MENU button to turn off the
menu screen.
• The time code appears when the on-
screen indicators are turned on.
To turn off the time code
Select “DISP. OFF” in step 4 above.
Note:
• When the tape reaches an unrecorded section,
the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.
Displaying the time code on a
TV during playback
1
In TAPE-VCR mode, press the MENU
button until the menu screen appears.
2
Press l or m on the operation button
to select I, then press the SET button.
3
Press l or m to select “TC OUT”, then
press the SET button.
4
Press l or m to select “ON”, then press
the SET button.
5
Press the MENU button to turn off the
menu screen.
D I SP. ON T I ME CODE
TC 0 0 5 : 3 5 :
A UD I O A UD I O 2 1 + 2 1 +
O F F
O N
O T H E R S
B E E P
R E MO T E
T I ME C O D E
T C OU T
R E T U RN
ON T C OU T
* Displayed during still
playback.
Frame number*
Second
Minute
Hour
Time code
VL-NZ100H-047-054 02.2.14, 10:02 AM 47