Sharp VL-NZ100S - Manual (Page 68)

Digital Still Camera Features
Card Recording
Digital Still Camera
Features
57
Recording with the Self-
timer
Available mode:
CARD-CAMERA
The self-timer function allows you to record
images after a time-lag of 10 seconds. This is
convenient when you want to record an image
of you and your friends together.
1
In CARD-CAMERA mode, press the
MENU button until the menu screen
appears.
2
Press l or m on the operation button
to select T, then press the SET button.
3
Press l or m to select “SELF TIMER”,
then press the SET button.
4
Press the STILL button fully to set the
timer.
• The self-timer operating indicator flashes
while the timer counts down.
• The shutter automatically releases after
10 seconds, and a still image of the
subject is recorded.
Notes:
• When recording with the self-timer, stabilize the
camcorder in the horizontal plane by attaching it
to a tripod, etc.
• To cancel the self-timer, press the STILL button
fully again in step 4 above.
• Self-timer mode cancels after recording one
image. Repeat steps 1 to 4 to record another
image with the self-timer.
Caution:
• Do not turn the power off or remove the card
once the self-timer operating indicator begins
flashing.
E X E C U T E
NORMAL
A U T O
/ 0 1 8 0
CARD
E F F E C T P I C .
S C E N E ME N U
S E L F
R E T U RN
GU I D E
T I ME R
S E T T I N G 1
NORMAL
A U T O
/ 0 1 8 0
CARD
Self-timer operating indicator
VL-NZ100H-055-058 02.2.14, 10:03 AM 57